Table of Contents
Advertisement
W-DMX MicroBox G6
User interface
Though the interface display appears simple, there is a lot of information you can read back, which will
help you properly set up your system and help you understand how your devices are operating.
Figure 2:
Front panel overlay
1. BATTERY Not used on the MicroBox series.
2. SIGNAL Indicates that the Signal status is showing signal strength.
3. SIGNAL STATUS On a receiver; indicates the received signal quality. On a transmitter; indicates
the configured output power.
4. TX Device is operating as a transmitter.
5. RX Device is operating as a receiver.
6. LINK On a transmitter; states it's ready to establish a link. On a receiver;
• Off: not linked to any transmitter
• On: active link from a transmitter
• Blinking: Linked to a transmitter but link is lost [either the transmitter is outof-range or turned
off].
7. DMX Indicates whether DMX data is present.
8. MODE Indicates the radio mode [See chapter 3.4].
9. RDM Flashes when there is RDM traffic activity.
10. PWR States power condition of the device.
11. WIFI Not used on the MicroBox series.
12. Red function button.
Wireless Solution Sweden AB
2022-09-30
7
Advertisement
Table of Contents
