Mercedes-Benz E 2008 Series Owner's Manual page 99

mkalafa,
Controls
Seat belts
For this reason, check regularly that the
seat belts are not damaged or dirty.
Always have damaged seat belts or seat
belts that have been subjected to a load in
an accident replaced at a qualified special-
ist workshop. Choose a qualified specialist
workshop which has the necessary special-
ist knowledge and tools for the work
required. Mercedes-Benz recommends
that you use a Mercedes-Benz Service
Centre for this purpose.
For safety reasons, Mercedes-Benz recom-
mends that you only use seat belts which
have been approved by Mercedes-Benz for
your vehicle.
96
Version: 2.9.4
Belt sash guide
1
Belt tongue
2
Buckle
3
Release button
4
Routing the belt
Adjust the seat and move the backrest to
X
an almost vertical position (
Y
Pull the belt smoothly through belt sash
X
guide 1.
Route the belt over the centre of the shoul-
X
der without twisting it.
Engage belt tongue 2 into buckle 3.
X
If necessary, adjust the belt to the appro-
X
priate height ( page 97).
Y
If necessary, pull upwards on the shoulder
X
section of the belt to tighten the belt across
your body.
Routing the belt
Press release button 4 and guide belt
X
tongue 2 back towards belt sash guide
1.
page 77).