Mercedes-Benz E 2008 Series Owner's Manual page 177

mkalafa,
Controls
Air conditioning
The symbols for the air distribution have the
following meanings:
Symbol Meaning
Z
Directs the airflow through the
centre, the side and the demis-
ter air vents
a
Directs the airflow through the
centre and side air vents
X
Directs the airflow to the entire
vehicle interior
Y
Directs the airflow through the
centre, the side and the foot-
well vents in the front and rear
Make sure that the key is in position 2 in
X
the ignition lock.
Turn thumbwheel 1 or 7
X
sponding symbol ( page 166). The thumb-
Y
wheel can also be turned to the area
between two symbols.
Depending on the outside temperature.
29
174
Version: 2.9.4
Setting the airflow
Make sure that the key is in position 2 in
X
the ignition lock.
To increase/reduce: press the
X
· button.
Demisting the windscreen
i
You should only select the "demisting"
function until the windscreen is clear again.
Make sure that the key is in position 2 in
X
the ignition lock.
To activate: press the
X
The indicator lamp in the
comes on.
The system automatically switches to the
following functions:
cooling with air dehumidification on
R
to the corre-
R high airflow
R high temperature
air distribution to the windscreen and
R
front side windows
air-recirculation mode off
R
Q or
y button.
y button
29
29
To deactivate: press the y
X
The indicator lamp in the y
out. The previously selected settings come
into effect again. The cooling with air dehu-
midification function remains on. Air-recir-
culation mode remains deactivated.
or
Press the U button.
X
The indicator lamp in the y
out. Airflow and air distribution are set to
automatic mode.
or
2-zone Thermatic: turn thumbwheels
X
or 7 clockwise or anti-clockwise
( page 164).
Y
or
2-zone Thermatic: press the
X
· button.
button.
button goes
button goes
1
Q or