Homelegance 1524-5 Assembly Instruction

Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and
hardware before assembly. Parts apparently missing are often found in the packing materials. If you do not have all the parts listed,
have your dealer contact us and they will be sent to you immediately.
It is recommended to install protective pads under all legs and supports to avoid damage or
scratches when placing furniture on a wood floor or other hard surface, and to limit
indentation and prevent discoloration if placing on carpet.
NOTE: Anti tipping hardware kit comes with this product. Please refer to the installation instruction in the hardware
d'installation dans inclu dans la trousse de quincaillerie
PART LIST/ LISTE DE PIECE
NO COMPONENT
A
MIRROR / MIROIR
DRESSER / BUREAU DOUBLE
B
MIRROR SUPPORT / MIROIR
C
SOUTIEN

STEP 1

Cut of the Raffia String from the back of DRESSER ( B ).
MADE IN MALAYSIA
NOTE : MUST TIGHTEN SCREWS PERIODICALLY
ASSEMBLY INSTRUCTION /
INSTRUCTION D' ASSEMBLAGE
QTY
SKETCH NO
1
1 PC
1 PC
2
PCS
:
WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
DESCRIPTION SKETCH
C SK SCREW / VIS
C
QTY
SIZE
10
M4 x 32MM
PCS
PAGE 1 OF 2 /
PAGE 1 DE 2