Table of Contents
Advertisement
OTHER SETTINGS
FACTORY RESET
Holding the auto and timer buttons together for 3 seconds will
reset your humidifier and restore factory settings. This clears all
user parameters in each mode.
CONTROLLER LOCK
Holding the power button will lock the humidifier in your current
mode. While your humidifier is locked, no parameters may be
adjusted, nor will you be able to switch modes. Holding the
power button again will unlock the humidifier.
HIDE SCREEN
Lock your humidifier so no settings can be adjusted. See above.
Then tap the power button to turn the display off. Tapping it
again will turn the display back on. Programs will still run in the
background while the LCD screen is off.
RESET TO OFF/DEFAULT
Holding the mist, auto, or timer button for 3 seconds will reset
the value of your current mode to Default. Pressing either the
mist, auto, or timer button will return to the previous value.
26
HOLD +
HOLD +
PRESS +
HOLD +
HOLD +
HOLD +
- Quick Links:
- Manual Index
- Key Features
- Installation
- Other Settings
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CLOUDFORGE T3 and is the answer not in the manual?
Questions and answers
can the humidifier be programmed to run continuosly
Yes, the AC Infinity CLOUDFORGE T3 humidifier can run continuously, especially if it is set to maintain a high humidity level. Users have reported that it may operate at maximum output if the humidity target is set too high or if there are hidden triggers or automation settings on the controller. Additionally, some units may run continuously due to a faulty USB-C port or a malfunctioning unit. Proper settings and checks are recommended to prevent unintended continuous operation.
This answer is automatically generated