Table of Contents
Advertisement
PROGRAMMING
1. POWER BUTTON
Turns your humidifier ON or OFF.
4. TIMER BUTTON
Sets a countdown timer to turn your
humidifier off, ranging between 1
and 12 hours in 1-hour increments.
7. CURRENT LEVEL
Displays the humidifier's current
misting level.
22
8
5
7
6
2
3
1
2. HUMIDITY BUTTON
Cycles through the humidifier's
misting levels between 0 and 4.
5. PROBE HUMIDITY
Displays the current humidity that
the probe is measuring. Shows "--"
if no probe is plugged in.
8. ALERT ICONS
Displays alerts and statuses of
the onboard controller, including
the controller lock and AUTO
HUMIDITY alert.
4
3. AUTO BUTTON
Sets the low humidity trigger,
ranging between 35 and 95%
in 5% increments.
6. TIMER
Displays the TIMER mode
countdown with hour mark
intervals to show when your
humidifier will turn off.
- Quick Links:
- Manual Index
- Key Features
- Installation
- Other Settings
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CLOUDFORGE T3 and is the answer not in the manual?
Questions and answers
can the humidifier be programmed to run continuosly
Yes, the AC Infinity CLOUDFORGE T3 humidifier can run continuously, especially if it is set to maintain a high humidity level. Users have reported that it may operate at maximum output if the humidity target is set too high or if there are hidden triggers or automation settings on the controller. Additionally, some units may run continuously due to a faulty USB-C port or a malfunctioning unit. Proper settings and checks are recommended to prevent unintended continuous operation.
This answer is automatically generated