Wolf M Series Troubleshooting Manual page 7

M Series Wall Oven (SWS #22607000)
Troubleshooting
Logging Faults
Up to 20 faults can be logged and viewed on the Faults tab. Faults can be cleared manually or from self-correcting.
If multiple instances of the same fault are detected the time stamp of the fault will updated to show the last occur-
rence.
Example of Faults Tab
The Faults tab lists the fault code under Code, the specific fault under Fault Name, and at what time it occurred
under Odometer. The bottom of Faults tab also provides the number of faults, the amount of time the unit has been
in operation, and the Clear Faults button to clear the fault codes. (See Figure 4-10).
Using the Fault Code Chart
The Fault Code Chart lists the faults by fault number. Then Priority. The next column is the suggested test proce-
dure for checking the fault. The last column is the action required.
Figure 4-10 Fault Tab Screen
4-8
830805 - Rev. A - January, 2022