Page 1
MODEL V739 VICOAX ® VIDEO / DATA TRANSMISSION SYSTEM VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788 TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116 UK: +44 (0) 1489 566300 WEB www.vicon-cctv.com 24-Hour Technical Support: 800-34-VICON (800-348-4266)
Page 2
We stand behind the quality and dependability of every product with an industry leading Beneficial Use warranty. If you are not satisfied with a Vicon product or service, I would like to know. Your complete satisfaction is the mission of every Vicon employee.
Page 3
Use only with a mounting accessory recom- mended by Vicon, or sold with the video product. Any mounting of the video product should follow Vicon's instruc- tions, and a mounting accessory recommended by Vicon should be used.
Page 4
Vicon or or electric shock. Never spill liquid of any kind on that have the same characteristics as the original the video product.
This manual is a guide to the installation and operation of A complete system consists of a transmitter, V739T, and a the V739 series fiber optic video and data transmission receiver, V739R. Units are designed for standalone oper- system. Please read the entire manual before installing ation or for installation in Vicon’s V515R-PS or V517R-PS...
Page 6
VIDEO V739R-R OPTICAL ALARM NOTE: ALARM JUMPER W1 SHOWN IN THE ON (ENABLED) POSITION VIDEO V739T-R OPTICAL NOTE: ALARM ON (ENABLED) WITH JUMPER W1 INSTALLED FIGURE 2: RACK-MOUNT V739R-R AND V739T-R MODEL V739...
LED OPERATION front panel of the card is seated against the front of the rack. The V739 has 5 LED indicators that are very useful in describing the current state of operation, as well as the CONNECTIONS current status of data flow and fiber optic signal strength.
Page 8
RESP IN ( or OUT) Indicator NOTE: The V739 monitors the sync signals on the video The RESP IN and OUT LEDS monitor the response sig- to determine the strength of the signal. It does not mon- nals from the camera equipment to the monitoring equip- itor the brightness signal.
Use the following procedure when returning a unit to the warranty. factory: 1. Call or write Vicon for a Return Authorization (R.A.) at 3. Pack the unit carefully. Use the original shipping one of the locations listed below. carton or its equivalent for maximum protection.
Page 10
This function is not available in all systems. Indicates transmission of Genlock Synchronization signals greater than 2 volts, Green where applicable. SYNC IN No Genlock Synchronization signal received or level is less than 2 volts. MODEL V739...
Page 11
LVL/LOSS LVL/LOSS VIDEO OUT VIDEO OUT CMND IN CMND IN RESP OUT SYNC IN RESP OUT SYNC IN V739-R V739R Surface Mount Receiver V739R-R Rack Mount Receiver LVL/LOSS LVL/LOSS VIDEO IN VIDEO IN CMND OUT CMND OUT RESP IN SYNC OUT...
Green LED. ≤ 100 ft (30 m). Sync In: Green LED. Sync Out: Green LED. Receiver to video devices: ≤ 100 ft (30 m). Note: RG59/U coaxial cable, Belden No. 9259 or equivalent, is recommended for video interconnection. MODEL V739...
Page 13
TECHNICAL INFORMATION MECHANICAL MOUNT ARDS Module Width: 1 slot, 1.0 in. (25.4 mm). URFACE OUNT ODULES Dimensions: Length: 4.75 in. (121 mm). Weight: 0.76 lb (0.34 kg). Width: 4.125 in. (105 mm). Shipping Dimensions: Length: 9.75 in. (247.7 mm). Height: 1.125 in.
Need help?
Do you have a question about the V739 and is the answer not in the manual?
Questions and answers