Table of Contents
Advertisement
Quick Links
XX050
MODEL V730
DIGITAL VIDEO / DATA TRANSMISSION FOR
NOVA™ CONTROL SYSTEMS
VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788
TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116
UK: 44/(0) 1489-566300 INFOFAX: 800-287-1207 WEB www.vicon-cctv.com
24-Hour Technical Support: 800-34-VICON (800-348-4266)
Section 10 Rev 601
Vicon part number 8009-8050-00-01
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vicon V730
Summary of Contents for Vicon V730
- Page 1 MODEL V730 DIGITAL VIDEO / DATA TRANSMISSION FOR NOVA™ CONTROL SYSTEMS VICON INDUSTRIES INC., 89 ARKAY DRIVE, HAUPPAUGE, NEW YORK 11788 TEL: 631-952-CCTV (2288) FAX: 631-951-CCTV (2288) TOLL FREE: 800-645-9116 UK: 44/(0) 1489-566300 INFOFAX: 800-287-1207 WEB www.vicon-cctv.com 24-Hour Technical Support: 800-34-VICON (800-348-4266)
- Page 2 We stand behind the quality and dependability of every product with an industry leading Beneficial Use warranty. If you are not satisfied with a Vicon product or service, I would like to know. Your complete satisfaction is the mission of every Vicon employee.
- Page 3 Use only with a mounting accessory recommended by Vicon, or sold with the video product. Any mount- ing of the video product should follow Vicon's instructions, and a mounting accessory recom- The exclamation point within an equilateral tri- mended by Vicon should be used.
- Page 4 16. Overloading - Do not overload wall ice technician has used replacement parts outlets and extension cords as this can specified by Vicon or that have the same result in a risk of fire or electric shock. characteristics as the original part.
-
Page 5: Installation
Rack Cards Rack cards are designed to be installed in one of Vicon’s 19-inch (483-mm) EIA standard card-cage racks, either continued on page 3... -
Page 6: Transmitter Module
RS485 2-wire standard RS485 2-wire 1V RS485 2-wire 2V RS485 4-wire standard RS485 4-wire 1V Single Fiber Two Fiber RS485 4-wire 2V CONNECTION C,D,E Not Used Test Mode 12 - 16 VDC 24 VAC 24 VAC DC Ground MODEL V730... -
Page 7: Module Setup
(Tables 2, Data Translation 7, and 8 on page 7) will not apply. The data translation capability of the V730 series is unique Alarm Jumper in the industry. It allows translation from one format to... -
Page 8: Operation
Rack modules power connections are made automatically 1. Call or write Vicon for a Return Authorization (R.A.) at when the card is installed. To supply power to the rack, one of the locations listed below. -
Page 9: Test Mode
Having done this, you have proven that the copper-in- The V730 has a +5 V bias pin and ground pins on the con- to-fiber-to-copper-out conversion is working in both direc- nector for this purpose. - Page 10 As the optical power is decreased, as happens being input to the V730 over copper. A GREEN LED indi- through long fiber runs, splices, or connections, the intensi- cates a logic HIGH is present on the copper inputs. A YEL-...
- Page 11 DATA CONNECTION TABLES TABLE 2: TABLE 3: TABLE 4: RS232 Interface RS232 with Handshaking Interface TTL Interface Data Select Switch: Position 1 Data Select Switch: Position 2 Data Select Switch: Position 3 Pin No. Function Pin No. Function Pin No. Function RTS/CTS TTL IN...
- Page 12 RS422 ! RS232, 3 wire Differential to Single Ended Conversion. RS232, 5 wire ! RS485 7 - A RS232 Handshaking bit is used to indicate tri-state. RS485 ! RS232, 5 wire 7 – A Tri-state detection circuitry activates handshaking bit MODEL V730...
-
Page 13: Diagnostic Indicators
DIAGNOSTIC INDICATORS TABLE 14: TRANSMITTER LED DIAGNOSTIC INDICATORS NAME COLOR INDICATES / CORRECTIVE ACTION Green Sufficient optical power received. No action required. LEVEL/ LOSS Insufficient optical power received. Verify fiber connected & within optical budget, receiver power on. Green Valid video signal into Tx unit. No action required. VIDEO No video signal into Tx unit. -
Page 14: Technical Information
Fiber Type: 62.5 um. ≤ 100 ft (30 m). Modulation Type: Digital Time Division Multiplexing Receiver to video devices: (TDM). ≤ 100 ft (30 m). Note: RG59/U coaxial cable, Belden No. 9259 or equivalent, is recommended for video interconnection. MODEL V730... -
Page 15: Connectors And Indicators
TECHNICAL INFORMATION MECHANICAL CONNECTORS AND INDICATORS Optical Connectors: ST type. URFACE OUNT RANSMITTER Dimensions: Length: 4.0 in (102 mm). Video Connectors: BNC. Width: 4.55 in (116 mm). Data Connector: Detachable screw terminal. Height: 1.95 in (50 mm). Power Connector: Detachable screw terminal. Weight: 0.75 lb (0.34 kg). - Page 16 Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-CCTV (2288) 800-645-9116 Fax: 631-951-CCTV (2288) Infofax: 800-287-1207 Vicon Europe Headquarters Brunel Way Fareham, PO15 5TX United Kingdom 44/(0) 1489/566300 Fax: 44/(0) 1489/566322 Brussels Office Planet II - Unit E...
Need help?
Do you have a question about the V730 and is the answer not in the manual?
Questions and answers