Turning on
Press the lever up until the desired position is
reached.
▷
Resting position of the wipers, position 0.
▷
Intermittent operation or rain sensor, posi-
tion 1.
▷
Normal wiper speed, position 2.
▷
Fast wiper speed, position 3.
When the journey is interrupted with the win-
dow wiper system switched on: when travel
continues, the wipers resume at their previous
level.
Turning off and flick wipe
Press the lever down.
▷
Switching off: press the lever down until it
reaches its basic setting.
▷
Flick wipe: press the lever down from the
basic setting.
The lever automatically returns to its basic
setting when released.
Online Edition for Part no. 01405A540A1 - II/22
Driving
Intermittent operation or rain sensor
Principle
The rain sensor automatically controls the
wiper operation depending on the intensity of
the rainfall.
General information
The sensor is located on the windshield, di-
rectly in front of the interior mirror. Without the
rain sensor, the interval of the wiper operation
is predefined.
Safety information
NOTICE
If the rain sensor is activated, the wipers can
accidentally start moving in car washes.
There is a risk of damage to property, among
other potential damage. Deactivate the rain
sensor in car washes.
Activating
Press the lever up once from its basic setting,
arrow 1.
Wiping operation is started.
The LED in the wiper lever is illuminated.
In frosty conditions, wiping operation may not
start.
Deactivating
Press the lever back into the basic setting.
CONTROLS
105
Need help?
Do you have a question about the X2 2022 and is the answer not in the manual?