LevelOne WBR-6011 User Manual page 50

PC Configuration
Internet Access
To configure your PCs to use the Wireless Router for Internet access:

Ensure that the DSL modem, Cable modem, or other permanent connection is
functional.

Use the following procedure to configure your Browser to access the Internet
via the LAN, rather than by a Dial-up connection.
For Windows 2000
1. Select Start Menu - Settings - Control Panel - Internet Options.
2. Select the Connection tab, and click the Setup button.
3. Select "I want to set up my Internet connection manually, or I want to connect
through a local area network (LAN)" and click Next.
4. Select "I connect through a local area network (LAN)" and click Next.
5. Ensure all of the boxes on the following Local area network Internet Configura-
tion screen are unchecked.
6. Check the "No" option when prompted "Do you want to set up an Internet mail
account now?".
7. Click Finish to close the Internet Connection Wizard.
Setup is now completed.
For Windows XP
1. Select Start Menu - Control Panel - Network and Internet Connections.
2. Select Set up or change your Internet Connection.
3. Select the Connection tab, and click the Setup button.
4. Cancel the pop-up "Location Information" screen (optional).
5. Click Next on the "New Connection Wizard" screen.
6. Select "Connect to the Internet" and click Next.
7. Select "Set up my connection manually" and click Next.
8. Check "Connect using a broadband connection that is always on" and click
Next.
9. Click Finish to close the New Connection Wizard.
Setup is now completed.
For Windows Vista
You might already be connected to the Internet if your PC is connected to a local
area network. Open your web browser and try accessing a website to find out.
1. Select Start - Control Panel - Network and Internet.
2. Select Network and Sharing Center.
3. Select Set up a connection or network
4. Select Connect to the Internet.
5. Select the desired method to fit your environment.
Accessing AOL
To access AOL (America On Line) through the Wireless Router, the AOL for Win-
dows software must be configured to use TCP/IP network access, rather than a
dial-up connection. The configuration process is as follows:

Start the AOL for Windows communication software. Ensure that it is Version
2.5, 3.0 or later. This procedure will not work with earlier versions.
47