On-Screen Display (Osd); Troubleshooting - Vantron TMO Series User Manual

Vantron
Embedded in your success, Embedded in your better life
|
World-leading provider of embedded/IoT products and solutions

2.1.4 On-screen Display (OSD)

OSD control keys function as follows (not applicable to TMO07-DV & TMO101-DV):
Key
Menu
Select

2.2 Troubleshooting

Please refer to the following solutions/suggestions in case you encounter a trouble during
use of the touch monitor.
If the trouble is not covered here or if the trouble persists, please contact your sales
representative as indicated in Technical Support and Assistance in the Foreword. Please
note that the solutions/suggestions are intended for models other than TMO07-DV &
TMO101-DV. Should you have any trouble with TMO07-DV & TMO101-DV, please contact
your sales representative.
1. The touchscreen display does NOT respond when turning on the system.
- Check if the DC power adaptor is properly connected and functions well.
2. The touch monitor is dim.
- Use the OSD control keys to adjust the brightness or contrast of the display (up for
contrast adjustment, down for brightness adjustment).
3. The touch monitor does NOT wake up automatically and the indicator is solid red.
- Tap the screen and wait for the monitor to respond. If it fails, press the power button,
or re-connect the power supply, and wait a few seconds till the indicator turns green.
4. The image is NOT properly displayed.
- Adjust the resolution/timing mode of the PC/master device to be within the allowable
ranges specified for the touch monitor. Or, adjust the display parameters manually
with the OSD control keys.
TMO Series | User Manual
When OSD is not displayed
OSD menu
OSD contrast submenu
OSD brightness submenu
NA
14
When OSD is displayed
Get into the submenu of a selected
parameter
Increase value of selected parameter/
Move to next menu upwardly
Decrease value of selected parameter/
Move to next menu downwardly
Return to previous OSD menu
www.vantrontech.com