Hyundai HSPA800-AC Original Instructions Manual page 16

Test Spray Settings
NOTE: Ensure you follow the "Spraying Procedure" instructions before testing the spraying settings
of the Airless Spray Station.
Aligning Spray
1. Follow the "Pressure Relief Procedure" instructions
2. Rotate the Nozzle Guard (4) to match the direction of the preferred spray pattern (Fig.8).
Spraying Technique
1. Move the Spray Gun (6) with the entire arm, not by flexing the wrist. This will keep the Spray Gun
(6) at right angles to the surface, keeping the pattern even (Fig,9a)
2. Pull the spray gun Trigger (3) after starting the stroke, and release the Trigger (3) before ending
the stroke. The Spray Gun (6) should be moving when the Trigger (3) is pulled and released
(Fig.9b).
Fig. 9a
16