Sealey GSS1508 Instructions Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
Refer to Wear protective
instruction gloves
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when building this shed.
‰
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep children and unauthorised persons away from the working area.
DO NOT use the shed for any purpose other than that for which it is designed.
8
9
Use appropriate safety clothing including eye protection.
NOTE: The assembly of this product will require assistance.
8 DO NOT attempt assembly in windy conditions
8 8
2. TOOLS REQUIRED
Drill, measuring tape, cross head screwdriver, rivet gun, rubber mallet, sturdy ladder, adjustable spanner, 2 saw horses, 3mm steel drill
bit, 9mm masonry drill bit.
© Jack Sealey Limited
INSTRUCTIONS FOR
GALVANISED STEEL SHED
GALVANISED STEEL SHED GREEN
MODEL NO'S:
Wear eye Wear safety
protection footwear
GSS1508 & GSS1508G
GSS1508/G| Issue 2 (I) 08/08/17