Using The Bodypack Transmitter; Switching The Bodypack Transmitter On/Off - Sennheiser SK 2000 Instruction Manual

Using the bodypack transmitter

To establish a transmission link, proceed as follows:
1. Switch the bodypack transmitter on (see next section).
2. Switch the receiver on (see the instruction manual of the receiver).
The transmission link is established and the display backlighting of the
receiver changes from red to orange.
It is vital to observe the notes on frequency selection on page 20.
If you cannot establish a transmission link between transmitter and
receiver, read the chapter "Synchronizing the bodypack transmitter with a
receiver" on page 20.

Switching the bodypack transmitter on/off

Push the two battery compartment catches
compartment cover µ.
¸
To switch the bodypack transmitter
Briefly press the
ON/OFF
The "Frequency/Name" standard display appears on the
display panel. The red
sion icon
an RF signal.
To switch the bodypack transmitter
switch-on (offline operation):
Keep the
ON/OFF
appears on the display panel.
Using the bodypack transmitter
¸
µ
on (online operation):
ON/OFF button
¿
ON LED
is displayed. The bodypack transmitter transmits
on and to
ON/OFF button pressed until
¸
and open the battery
¿
.
lights up and the transmis-
deactivate the RF signal on
"RF Mute Off?"
11