Cleaning & Maintenance - universalblue UBTV2000-19 Instruction Manual

This appliance has 4 different positions:
 0 position or OFF position.
 Fan position.
 Position I hot air.
 Position II hot air, for the maximum hot possible.
To operate your appliance, please follow below instructions.
1. Plug the heater considering the voltaje (230 V)
2. Set the rotary switch to maximum speed to quickly warm the. Once the room is
at the desire temperature, select a lower setting to reduce electrical consumption
and avoid a very hot room.
3. Adjust the thermostat to maximum and select the desired power setting. Once
the room is comfortable, rotate the thermostat counterclockwise, until the heater
shuts off. The thermostat will now maintain the temperature by cycling the
heater on or off. During particularly cold weather, the low power setting may be
insufficient to satisfy the thermostat. Select a higher setting for these periods.
4. Before switching off the appliance will for 5-10 second in cool conditions. After
that the appliance will be switched off.
4. CLEANING & MAINTENANCE
After using and before cleaning always unplug the appliance and wait until the item is
cool.
The appliance should be cleaned regularly to stop dirt and dust building up which will
affect its performance.
Wipe exterior surface of the appliance with a moistened cloth. Not rinse with water
directly. Do not clean the painted-parts with emery-flour or solvents and use only a
moistened-cloth.
Use the appliance when the body is dried completely after cleaning the heater.
15