Cleaning & Maintenance; After Sales Service - universalblue UCERAMIC1800-19 Instruction Manual

 II for maximum heat (1800W)
It is recommended to use the highest power in order to heat the room quickly. Once
the room is at the desired temperature, select a lower power mode to reduce power
consumption and prevent the room from getting too hot.
In the same way, set the thermostat to maximum and select the desired power setting.
Once the room is at the ideal temperature, turn the thermostat counterclockwise until
the heater turns off. The thermostat will now keep the temperature automatically
turning on or off the device. During cold weather the setting at low power may be
insufficient. In that case, select a higher power.
When the appliance is turned off, please consider that the heater will continue to
operate for 5 or 10 seconds in fan mode until it is turned off.
This heater is equipped with a safety switch that automatically switches off the
heater's resistance if it is not in the vertical position. In this case, the appliance will
return to normal operation when the heater returns to the vertical position.
4. CLEANING & MAINTENANCE
After using and before cleaning always unplug the appliance and wait until the item is
cool.
The appliance should be cleaned regularly to stop dirt and dust building up which will
affect its performance.
Wipe exterior surface of the appliance with a moistened cloth. Not rinse with water
directly. Do not clean the painted-parts with emery-flour or solvents and use only a
moistened-cloth.
Use the appliance when the body is dried completely after cleaning the heater.
To store the appliance, put the appliance back into its original packaging and store it in
a clean dry place
5.

AFTER SALES SERVICE

This product has a warranty of 2 years from the date of purchase of the product, with
the following conditions:
 The guarantee is valid only with the presentation of the purchase invoice of the
product.
 Damage caused during transport, negligence or misuse, incorrect assembly or
installation, as well as external influences, such as: atmospheric or electrical
lightning, flooding, humidity, etc., are not covered by the warranty.
14