auna Franklin Instruction Manual page 44

EN
44
Setting the alarm
With this function, the system automatically switches on and wakes you
up with soft CD music or radio. Repeatedly press the MODE button on the
remote control. The display shows the settings in the following order:
Current time
1
Start time Press the CLK-ADJ button and then the
2
set the start time. Then press the CLK-ADJ button again to save
the alarm start time.
Switch-off Press the CLK-ADJ button and then the
3
time set the switch-off time. Then press the CLK-ADJ button again to
save the alarm switch-off time.
Mode Press CLK-ADJ and then the button
4
mode (CD/USB/TUNER/TAPE/PHONO). Press the CLK-ADJ
button again to complete the setting.
• Programming is automatically cancelled if no button is pressed within
about 10 seconds.
• If there is no CD in the selected CD drawer, the system selects the next
available CD.
• If no music source is detected when the preset time is reached, the
system automatically selects the radio mode (TUNER).
Activating and deactivating the alarm
• Press the SLEEP/TIMER button once and the timer indicator
on the display.
• To cancel the alarm function, press the SLEEP/TIMER button again until
the timer display goes out.
or button to
or button to
or to set the
appears