auna Franklin Instruction Manual page 40

EN
40
Copy cassettes (from deck 2 to deck 1)
Note: with this unit you can copy a recorded cassette to another (blank)
cassette. Copying is done in one direction only, from deck 2 (playback)
to deck 1 (recording).
Copying at normal speed
1. Press the TAPE button.
2. Place a recorded cassette in deck 2 and a blank cassette in deck 1.
3. Press the Pause button, then the Record and Play buttons on the deck 1
control panel.
4. Press the play button on the deck 2 control panel to start playback on
deck 2, then press the pause button on deck 1 to start dubbing.
5. Press the Pause button on deck 1 and the Stop button on deck 2 when
you are finished.
Copying at higher speed
This machine is equipped with a high-speed copying system that can reduce
dubbing time by 2/3 compared to normal speed.
• Press the record dubbing button to the HI position and then proceed as
for copying at normal speed.
• When copying a recorded cassette at high speed, a chattering sound
can be heard. To avoid this, set the volume control to a minimum.
Note: During dubbing, do not activate/deactivate the HI-NOR button as
this may vary the recording speed and damage the cassette tape.
Recording cassettes from the radio
1. Press the RADIO button to activate the radio mode.
2. Tune to the desired station and insert a blank cassette into deck 1.
3. Press the Record and Playback buttons to start recording.
4. Press the Pause button and the Stop button when you are finished.