Operation - Makita XCV11 Instruction Manual

OPERATION

Using as a vacuum cleaner
NOTICE:
Use the HEPA filter when picking up
dry dust.
NOTICE:
Be sure to dry the HEPA filter, damper,
prefilter and the tank after picking up water or wet
dust. If you use the filter while it is wet, the suction
power may be reduced.
NOTICE:
If you continue to pick up water
with the HEPA filter, the suction power may be
reduced. In that case dry the HEPA filter.
Use the wet filter (optional accessory) when pick-
ing up water repeatedly.
Fig.16
► 1. HEPA filter 2. Wet filter
1.
Install the hose and nozzle onto the suction inlet
and turn on the tool.
2. After vacuum cleaning, empty the tank before it
becomes full.
Fig.17
1
Using as a blower
CAUTION:
as pool and sand area. If foreign objects are blown
into eyes, it may result in personal injury.
CAUTION:
the wind. If foreign objects are blown into eyes, it
may result in personal injury.
CAUTION:
cap and mask while operating.
CAUTION:
in the vicinity.
CAUTION:
ble for accidents or hazards occurring to other
people or their property.
CAUTION:
air into objects, like rubber rafting, balls or other
inflatable products. Increased motor revolution may
cause dangerous fan breakage.
1. Install the hose into the blower outlet.
2. Point the hose tip to the object to be blown off and
turn on the tool.
2
Fig.18
NOTE: To clean narrow space, connecting the sash
nozzle to the hose makes it easy.
11 ENGLISH
Do not blow out muddy water such
Do not operate as a blower against
Always use protective goggles, a
Never point the nozzle at anyone
The operator or user is responsi-
Do not use the tool for blowing