Wallbox Power Boost Installation Manual page 28

ECO-SMART
Configuration
Enabling Eco-Smart
1.
Make sure you have the latest version of the
myWallbox app installed on your mobile device.
Also make sure you have the latest software
version installed on your Wallbox charger.
2.
Enable Bluetooth on your mobile device and connect
to your charger. During each of the following steps,
be sure to remain within range of your Bluetooth
signal (typically no more than 30 feet).
3.
If you have not done so previously, follow the directions
on the app to create a new myWallbox account.
Once you have created your account, log into myWallbox
using your account username and password.
28