Installing Security Features - Lenovo ThinkCentre M58e 7268 User Manual

2. Ensure that the cables are routed correctly before lowering the drive bay
Figure 31. Cable routing
3. Lower the drive bay assembly and place the drive locks to the locked position.
4. Close the computer cover.
5. If a computer cover lock is installed, lock the computer cover.
6. Reconnect the external cables and power cords to the computer. See "Locating
7. To update your configuration, see Chapter 4, "Using the Setup Utility," on page
Note: In most areas of the world, Lenovo requires the return of the defective
Obtaining device drivers
You can obtain device drivers for operating systems that are not preinstalled at:
http://www.lenovo.com/support
Installation instructions are provided in readme files with the device-driver files.

Installing security features

To help prevent hardware theft and unauthorized access to your computer, several
security options are available. In addition to physical locks, unauthorized use of
your computer can be prevented by a software lock that locks the keyboard until a
correct password is typed in.
38
User Guide
assembly.
Important
Correctly route all power supply cables to avoid interference with the
drive bay assembly. Keep cables clear of the hinges and sides of the
computer chassis.
Otherwise, you cannot close the computer cover.
connectors on the rear of your computer" on page 8.
49.
Customer Replaceable Unit (CRU). Information about this will come with
the CRU or will come a few days after the CRU arrives.