Table of Contents
Advertisement
4. Connect a new mouse to the appropriate connector on the computer. Your
Figure 36. Mouse connectors
Completing the parts replacement
After completing the installation or replacement for all parts, you need to reinstall
the computer cover and reconnect cables.
To reinstall the computer cover and reconnect cables to your computer, do the
following:
1. Make sure that all components have been reassembled correctly and that no
2. If you have removed the front bezel, reinstall it. See "Removing and reinstalling
46
User Guide
mouse might be connected to a PS/2 mouse connector 1 or a USB connector
2 . Depending on where you want to connect your mouse, see "Locating
connectors on the front of your computer" on page 8 or "Locating connectors
on the rear of your computer" on page 9.
What to do next:
v To work with another piece of hardware, go to the appropriate section.
v To complete the replacement, go to "Completing the parts replacement."
tools or loose screws are left inside your computer. See "Locating components"
on page 11 for the locations of the various components in your computer.
the front bezel" on page 17.
Advertisement
Table of Contents
