Advertisement
3．Installing the Filter Replacement Sensor to the Server
Take the steps below to install the sensor to the server.
●Read the sections "Safety Precautions" and "Handling precautions" in the User's Guide of the
server in which you are going to install the bezel to install or remove the bezel safely and
properly.
1. Refer to "N8146-39/40 Dust Proof Bezel User's Guide" and remove the bezel from
the server.
2. Refer to the figure below to install a filter replacement sensor to the sensor slot.
Filter Replacement Sensor
（Inside view remove the bezel cover）
Sensor Cable(S1)
（Inside of bezel）
Sensor Cable(S1)
Filter Replacement Sensor
Cable holder
12
Filter Replacement Sensor
Cable holder
Sensor Cable (S2)
Advertisement
