Completing The Fru Replacement - Lenovo ThinkCentre A58e 0841 Hardware Maintenance Manual

Completing the FRU replacement

After replacing FRUs, you need to install any removed parts, replace the cover, and
reconnect any cables, including telephone lines and power cords. Depending on
the FRU you installed or replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Chapter 6, "Using the Setup
Utility," on page 47.
To reinstall the computer cover and reconnect cables to your computer, do the
following:
1. Make sure that all components have been reassembled correctly and that no
2. If you have removed the front bezel, reinstall it. See "Removing and reinstalling
3. Position the computer cover on the chassis so that the rail guide on the bottom
Figure 17. Reinstalling the computer cover
4. If the computer cover is secured with screws, install the screws.
5. If a cover lock is installed, lock the cover.
6. Reconnect the external cables and power cords to the computer.
7. To update your configuration, refer to Chapter 6, "Using the Setup Utility," on
106
Hardware Maintenance Manual
tools or loose screws are left inside your computer. See "Computer
components" on page 81 for the locations of the various components in your
computer.
the front bezel" on page 84.
of the computer cover engages the rail on the chassis. Then, slide the computer
cover closed until it snaps into position.
page 47.