Iiyama ProLite B2280HS-B1 User Manual page 28

Extra
Adjustment Item
Reset
Signal Select
At selected the AUTO, it will automatically be selected when just one source is available.
NOTE
If there are more input sources available and you select one of them, the AUTO option is
not available. If multiple inputs are connected, the monitor may not recover the last one
used after turning it off and on again. It is only possible when you set a specifi c source.
1
Audio Input *
2
Over Drive *
Information
1
* Suitable for HDMI/DisplayPort input only.
2
* Available for ProLite E2282HS, ProLite B2280HS-B1DP / ProLite B2280HS-W1DP, ProLite
E2280HS-B1DP / ProLite E2280HS-W1DP only.
When Over Drive is activated, some level of image retention will be caused.
3
* Available for ProLite E2282HS, ProLite B2280HS-B1 / ProLite B2280HS-W1, ProLite
E2280HS-B1 / ProLite E2280HS-W1 only.
4
* Available for ProLite B2280HS-B1DP / ProLite B2280HS-W1DP, ProLite E2280HS-B1DP / ProLite
E2280HS-W1DP only.
Direct
You can skip the Menu items and display an adjustment scale directly
by using the following button operations.
 Signal Select: Press the AUTO button when the Menu is not
displayed, it shows following Menu.
You can then select input source press the AUTO
button and press the MENU button.
Reset
Signal Select
Auido Input
Over Drive
Information
Input :
Resolution :
H.Frequency :
V.Frequency :
Problem / Option
Yes
No
Auto
D-SUB
Direct DVI
3
HDMI *
DisplayPort *
DisplayPort *
3
HDMI *
LINE IN
Off / -2 / -1 / 0 / +1 / +2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
Displays information regarding the current input signal coming
from the graphic card in your computer.
See your graphic card user guide for more information
NOTE
about changing the resolution and refresh.
Extra
Yes
Auto
LINE IN
Off
D-SUB
1920(H) 1080(V)
68KHz
60Hz
Factory-preset data is restored.
Return to Menu.
Select the signal input automatically.
Select the Analog input.
Select the Digital (DVI) input.
Select the Digital (HDMI) input.
4
Select the Digital (DisplayPort) input.
4
Select the DisplayPort input.
Select the HDMI input.
Select the LINE IN input.
Button to Press
D-SUB
DVI
HDMI
DisplayPort
OPERATING THE MONITOR 23
3
*
4
*