Micropilot FMR 231-PA
8
Maintenance and Repair
8.1
Maintenance
Check the condition of the transmitter during regular inspections. If necessary, free the
antenna from build-up. When cleaning the antenna, handle with care.
After the exchange of a complete Micropilot or the electronic module, the noted
parameters can be entered (e.g. download from computer) into transmitters with
communication interface or operating and display module. Measurements can then
proceed without the need for calibration.
•
If necessary, re-activate linearisation in V2H0
•
If necessary, record a new echo suppression map, see Chapter 6.3.
A new echo suppression map must be made if the antenna is exchanged.
Endress+Hauser
8 Maintenance and Repair
Maintenance
Exchange
51