Alma DUAL TRONIQUE User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

USER MANUAL

Evolution of the measuring system menu. Control of

a reel. Blocking contamination and DSPGI. Viscosity

2021/12/22

correction %. Presence of a trailer. Import ICOM

settings onto SD card Number of additive injectors in

metrological mode. RCT5 remote control

Issue

Date

Nature of modifications

MU 7093 EN C

DUAL TRONIQUE

MU 7093 EN C

DUAL TRONIQUE

This document is available on www.alma-alma.fr

FORM DOC 120 A

DSM

FDS

Written by

Approved by

Page 1/69

Table of Contents

Need help?

Do you have a question about the DUAL TRONIQUE and is the answer not in the manual?

Questions and answers

Summary of Contents for Alma DUAL TRONIQUE

Page 1 %. Presence of a trailer. Import ICOM settings onto SD card Number of additive injectors in metrological mode. RCT5 remote control Issue Date Nature of modifications Written by Approved by MU 7093 EN C DUAL TRONIQUE Page 1/69 This document is available on www.alma-alma.fr...
Page 2: Table Of Contents
SPECIFIC FEATURES ........................9 Use with DSPGI device ......................9 Contamination control on both full hoses ................10 Distribution mode PRESET+PURGE ..................10 USE THE DUAL TRONIQUE: USER MODE ..................11 Menu DELIVERY........................11 5.1.1 Pumped counted distribution mode ......................13 5.1.1.1...
Page 3 FORM DOC 120 A SET THE DUAL TRONIQUE: SUPERVISOR MODE ................33 Menu CALIBRATION/ GAUGE ....................33 6.1.1 Pumped mode ............................33 6.1.1.1 Sub-menu ENTER STANDARD VALUE ....................33 6.1.1.2 Sub-menu LINEARISATION/FLOW ....................34 6.1.2 Gravity mode ............................35 Menu PRODUCT SETTINGS ....................35 Menu CONFIGURATION .......................
Page 4 ANNEX 2: Visualization of the permitted characters on the MICROCOMPT+ display: ......64 ANNEX 3: Assignments table according to the number of flaps, product returns and additive injectors .. 65 ANNEX 4: Printings ..........................66 RELATED DOCUMENTS......................... 69 MU 7093 EN C DUAL TRONIQUE Page 4/69 This document is available on www.alma-alma.fr...
Page 5: General Presentation And Description
FORM DOC 120 A GENERAL PRESENTATION AND DESCRIPTION The DUAL TRONIQUE is a system that can manage one or two measuring systems based on a single calculator-indicator MICROCOMPT+. These measuring systems are fitted on a road tanker. It measures liquids other than water either by gravity or by pumping.
Page 6 Specific case: automatic scheduling (see §4.2) Select a figure, a letter or a menu Specific case: automatic scheduling (see §4.2) Validate the data Specific case: automatic scheduling (see §4.2) MU 7093 EN C DUAL TRONIQUE Page 6/69 This document is available on www.alma-alma.fr...
Page 7: Connected Features
 RFID NFC allowing the reading of an RFID key to switch in SUPERVISOR mode  Ethernet Base 10/100 The GSM module associated to the GPS navigation system allows the device tracking. Two antennas are located outside the MICROCOMPT box. MU 7093 EN C DUAL TRONIQUE Page 7/69 This document is available on www.alma-alma.fr...
Page 8 RFID key not Communication progress accepted, but in progress authentication is Wi-Fi Coordinates every 2 not found seconds Initialization Initialization Authentication error error error of the RFID MU 7093 EN C DUAL TRONIQUE Page 8/69 This document is available on www.alma-alma.fr...
Page 9: Configuration, Settings, Calibration
FORM DOC 120 A CONFIGURATION, SETTINGS, CALIBRATION CONFIGURATION: SETTINGS: SETTINGS, CALIBRATION: METROLOGICAL mode SUPERVISOR mode SUPERVISOR mode § CONFIGURE THE DUAL § SET THE DUAL TRONIQUE: § SET THE DUAL TRONIQUE: SUPERVISOR MODE TRONIQUE: SUPERVISOR METROLOGICAL MODE MODE §ANNEX 1 §ANNEX 1...
Page 10: Contamination Control On Both Full Hoses
DSPGI. 4.2 Contamination control on both full hoses According to the nature of the products, the DUAL TRONIQUE calculates the purge volumes in order to ensure a downgrading of the brewing areas in order to never contaminate the noblest product.
Page 11: Use The Dual Tronique: User Mode
PRINT DISPLAY MAINTENANCE The use of the DUAL TRONIQUE depends on the hardware configuration of the truck, the features and the configuration of the equipment carried out during commissioning. Therefore, the user menu depends on several items:  The instrumentation of the power take off.
Page 12 DISPLAY DISPLAY then the blue button to return to . Confirm with the green button to select the DELIVERY STOP next step (see § Finish/Continued delivery). MU 7093 EN C DUAL TRONIQUE Page 12/69 This document is available on www.alma-alma.fr...
Page 13: Pumped Counted Distribution Mode
Choosen product ≠ Hose product WAYPUMPED COUNTED Choose Choose Choose HOSE CONFIRM MODE PRESET  CONTAMINATION measuring hose product CONTAMINATION? system MODE  PRESET+PURGE MODE  FREE Non-systematic phases. MU 7093 EN C DUAL TRONIQUE Page 13/69 This document is available on www.alma-alma.fr...
Page 14 Press the red push button to go to the next step. MOVE START PTO REMOVING DELIVERY Choose ENGAGE PTO Delivery VEHICLE DELIVERY PAUSE compartment ENTER PRESET CONTINUE START VOLUME DELIVERY DELIVERY Non-systematic phases. MU 7093 EN C DUAL TRONIQUE Page 14/69 This document is available on www.alma-alma.fr...
Page 15 FREE/FUEL/CPT EMPTY COMPARTMENT NEXT CPT DELIVERY STOP CPT WITH XXXX L DELIVERY CPT WITH XXXX L Intermediate stop CPT WITH XXXX L TRAILER DELIVERY Non-systematic phases. MU 7093 EN C DUAL TRONIQUE Page 15/69 This document is available on www.alma-alma.fr...
Page 16: Two Step Purge
VOLUME OF PURGE DELIVERY ( FOD+) return compartment Delivery START PURGE PURGE / FOD+ / CPT2 END PURGE BLOWING PURGE FINISHED DELIVERY TICKET STOP ENGINE? Non-systematic phases. MU 7093 EN C DUAL TRONIQUE Page 16/69 This document is available on www.alma-alma.fr...
Page 17 Choose DELIVERY ( FOD) return VOLUME OF PURGE compartment Delivery START PURGE PURGE / FOD / CPT2 END PURGE BLOWING PURGE FINISHED STOP ENGINE? Non-systematic phases. MU 7093 EN C DUAL TRONIQUE Page 17/69 This document is available on www.alma-alma.fr...
Page 18: Pumped Not Counted Distribution Mode
WAYPUMPED NOT COUNTED ENTER START PNC/FUEL ENGAGE (in the hose) compartment DEFINITION DELIVERY measuring VOLUME system UNKNOWN Choose START PNC/FUEL ENGAGE QUANTITY compartment DELIVERY Non-systematic phases. MU 7093 EN C DUAL TRONIQUE Page 18/69 This document is available on www.alma-alma.fr...
Page 19: Intermediate Stop Of The Delivery
ENGAGE PTO Delivery VEHICLE DELIVERY PAUSE compartment You can change the criteria: press the red pushbutton when START DELIVERY is displayed with the volume already discharged. MU 7093 EN C DUAL TRONIQUE Page 19/69 This document is available on www.alma-alma.fr...
Page 20: Gravity Delivery
DELIVERY FINISHED ENTER PRESET START FILLING VOLUME DELIVERY DRAINING FINISHED PRESET/ FOD/CPT DRAINING  EMPTY End empty START FREE/FOD/CPT DRAINING DRAINING FINISHED FILLING DELIVERY Non-systematic phases. MU 7093 EN C DUAL TRONIQUE Page 20/69 This document is available on www.alma-alma.fr...
Page 21: Menu Product Movements
START PURGE / STOP DELIVERY PURGE ENGAGE BLOWING PURGE FUEL/CPT PURGE ENGINE? TICKET FINISHED REMOVING Print INVOICE START Delivery CONTINUE STOP PURGE PURGE DELIVERY Non-systematic phases. MU 7093 EN C DUAL TRONIQUE Page 21/69 This document is available on www.alma-alma.fr...
Page 22: Sub-Menu Product Transfer
Choose Valid the product START PRODUCT LOAD / FUEL END LOADING ENTER BLOWING LOADING return (in the hose) LOADING LOADING VOLUME FINISHED valve Non-systematic phases. MU 7093 EN C DUAL TRONIQUE Page 22/69 This document is available on www.alma-alma.fr...
Page 23: Menu Loading Plan
Set the volume loaded in this (ex: compartment 1) compartment (ex: FUEL) compartment (ex: 6000 l) 06000 ENTER PLAN? PRODUCTFUEL CHOOSE COMPARTMENT /QUANTITY? >VALID LOADING PLAN RESET PLAN RESET PLAN MU 7093 EN C DUAL TRONIQUE Page 23/69 This document is available on www.alma-alma.fr...
Page 24: Menu Print
The general parameters are printed first, then remove the sheet and add another one to print the parameters of the GENERAL+EM: measuring system (EM). Between each sheet, the message is displayed. PRINTING FINISHED Printing of the product and additive parameters PRODUCTS+ADDITIVES: MU 7093 EN C DUAL TRONIQUE Page 24/69 This document is available on www.alma-alma.fr...
Page 25 PRINTING PRINTING FINISHED Cargo plan: volumes available in compartments CARGO PLAN >ADD PAPER PRINTING PRINTING FINISHED 23.03.21 >ADD PAPER PRINTING PRINTING FINISHED EVENTS RECORDED DATE (DD.MM.YY) MU 7093 EN C DUAL TRONIQUE Page 25/69 This document is available on www.alma-alma.fr...
Page 26: Menu Display
Non-systematic phases. 5.5.2 Sub-menu MEMORY You can read all the measurement results stored by the DUAL TRONIQUE. That can be done in two ways: COMPLETE LIST : Display all the measurement details recorded, from the newest to the oldest, sorted by day then by measurement number.
Page 27: Menu Maintenance
DSPGI operation in order to perform or complete an operation. At the end of this operation, the initial situation is restored. DSPGI WITH DSPGI (AUTO) WITHOUT DSPGI(DEGRADED) MU 7093 EN C DUAL TRONIQUE Page 27/69 This document is available on www.alma-alma.fr...
Page 28: Sub-Menu Contamination
5.6.7 Sub-menu TEMPERATURES With active option:  METROLOGICAL>EMX>TEMPERATUREON Gives the product instantaneous temperature for EMA or for EMA and EMB. TEMPERATURES TEMPERATURE (EMA) °C INSTANT. TEMPERATURE TEMPERATURE (EMB) MU 7093 EN C DUAL TRONIQUE Page 28/69 This document is available on www.alma-alma.fr...
Page 29: Sub-Menu Inputs
Position of the selection valve pumped counted/pumped not counted INJECTOR STATUS  : Status of the injectors feedback: OFF/ON INJECTOR FEEDBACK  : Empty additive tanks: OFF/ON. ADDITIVE TANK MU 7093 EN C DUAL TRONIQUE Page 29/69 This document is available on www.alma-alma.fr...
Page 30: Sub-Menu Outputs
INJECTOR 2 (XX) EMA pulses output: PULSES OUTPUT PULSES OUTPUT 1 (XX) pictogram is on EMB pulses output: PULSES OUTPUT 2 (XX) pictogram is on Maintenance MU 7093 EN C DUAL TRONIQUE Page 30/69 This document is available on www.alma-alma.fr...
Page 31: List Of Alarms
Check the parameters and the hydraulic system (valve, strainer, EMX LOW FLOW DEFAULT Flow<Qmin consecutively during 0,2*MMQ nozzle…) EMX HIGH FLOW DEFAULT Flow>Qmax consecutively during 3 sec Check the parameters / Reduce flowrate MU 7093 EN C DUAL TRONIQUE Page 31/69 This document is available on www.alma-alma.fr...
Page 32 SAVE MEMORY DEFAULT Integrity problem with memorized data Substitution of the AFSEC+ electronic card FRAME WORK DEFAULT Integrity problem with software Substitution of the AFSEC+ electronic card MU 7093 EN C DUAL TRONIQUE Page 32/69 This document is available on www.alma-alma.fr...
Page 33: Set The Dual Tronique: Supervisor Mode
FORM DOC 120 A SET THE DUAL TRONIQUE: SUPERVISOR MODE CALIBRATION/ GAUGE PRODUCT SETTINGS CONFIGURATION SETTINGS TIME ADJUSTMENT PRINTER SETTINGS DSPGI COMPUTING LANGUAGE ICOM MENUS The access to the red boxes menus is restricted to the Maintenance with a red key.
Page 34: Sub-Menu Linearisation/Flow
: One of the tests has not been done (at low or high flowrate) ONLY ONE STANDARD  : Both tests have not been done (at low and high flowrate). NO VALID STANDARD MU 7093 EN C DUAL TRONIQUE Page 34/69 This document is available on www.alma-alma.fr...
Page 35: Gravity Mode
: Record the volume of primary product. For example “00200”: the  VOLUME/PULSE DUAL TRONIQUE puts a dose of additive every 200 liters of primary product (minimum value: 10L).  INJECTOR : The number of injectors is given by the metrological configuration INSTRUMENTATION>ADDITIVE INJECTOR...
Page 36 01/ADDITIVE SETTINGS VOLUME / PULSE VOLUME / PULSE INJECTOR1 INJECTOR INJECTOR2 00000 ADDITIVE DOSE ADDITIVE DOSE Maintenance 01/CORRECTIONOFF CORRECTION (XX) 01/CORRECTIONON 01/DSPGI CODE DSPGI CODE-- Maintenance MU 7093 EN C DUAL TRONIQUE Page 36/69 This document is available on www.alma-alma.fr...
Page 37: Menu Configuration
This menu is used to operate with loading plan or without loading plan. : When the function is active, a specific menu allows the user to LOADING PLANON determine the product quality and quantity for each compartment. MU 7093 EN C DUAL TRONIQUE Page 37/69 This document is available on www.alma-alma.fr...
Page 38: Sub-Menu Additive Type
: Activation of the operation with the RC FIOUL remote control REMOTE CTRRC FIOUL : Activation of the operation with the RCT5 remote control, See GU REMOTE CTRRCT5 7098. MU 7093 EN C DUAL TRONIQUE Page 38/69 This document is available on www.alma-alma.fr...
Page 39: Menu Settings
The purge volumes depend on the truck hydraulic configuration (manifold, hose...), they are set at commissioning, and they prevent from product contamination. When the system manages two measuring systems, define the parameters that follow for each one: MU 7093 EN C DUAL TRONIQUE Page 39/69 This document is available on www.alma-alma.fr...
Page 40: Sub-Menu Flowrate Settings
: Set the maximum permissible duration of the pump in ZERO FLOW AT PUMP operation at zero flow condition (in seconds). Minimum input value: 60; typical MU 7093 EN C DUAL TRONIQUE Page 40/69 This document is available on www.alma-alma.fr...
Page 41: Sub-Menu Backup Values
: Access restricted to the Maintenance with red key. At the end of delivery the FORCED TICKET printing of the delivery ticket or invoice printing is proposed. It is possible to force the printing by choosing FORCED TICKETON MU 7093 EN C DUAL TRONIQUE Page 41/69 This document is available on www.alma-alma.fr...
Page 42: Menu Dspgi
 : This feature blocks all operations if all conditions are ONWITHOUT DEGRADED not met : Assign a DSPGI code to an empty compartment. EMPTY CODE MU 7093 EN C DUAL TRONIQUE Page 42/69 This document is available on www.alma-alma.fr...
Page 43: Menu Computing
The sub-menus are different according to the level of access. the ANNEX 1 shows all the sub- menus available. Put the blue RFID key to display the available parameters as shown below: MU 7093 EN C DUAL TRONIQUE Page 43/69 This document is available on www.alma-alma.fr...
Page 44 Use red pushbutton to change the digit value INCLINOMETER PITCH -XX.X DEG ROLL XX.X DEG -X.XXX Y.YYY Z.ZZZ I-COM CONFIG SOFTWARE BOOT (447_VX.YY.ZZ) SOFT (446_VX.YY.ZZ) MICRO-SD CARD DATA DATABASE (VX.YY.ZZ) MU 7093 EN C DUAL TRONIQUE Page 44/69 This document is available on www.alma-alma.fr...
Page 45: Configure The Dual Tronique: Metrological Mode
FORM DOC 120 A CONFIGURE THE DUAL TRONIQUE: METROLOGICAL MODE INDICATOR REFERENCE CONFIGURATION EMA (XXX) EMB (XXX) DATE AND TIME 7.1 Menu INDICATOR REFERENCE Record the MICROCOMPT+ serial number. 000000 000000 ENTER REFERENCE INDICATOR REFERENCE 7.2 Menu CONFIGURATION DUAL OPTION...
Page 46: Dual Option Not Enabled
EMA (XX) DUAL OPTIONON FULL HOSE EMPTY HOSE 2 HOSES HOSE 1 (XX) HOSE 1FULL HOSE 2 (XX) HOSE 1EMPTY FULL HOSE EMB (XX) EMPTY HOSE MU 7093 EN C DUAL TRONIQUE Page 46/69 This document is available on www.alma-alma.fr...
Page 47: Sub-Menu Instrumentation
Control of the overfill protection of the truck and of the customer tank. OVERFILL PREVENTION CONTROL (XX) TRUCK PROBE (XX) CONTROLLOCAL CONTROLEXTERNAL CUSTOMER TANK (XX) CUSTOMER TANKOFF CUSTOMER TANKON MU 7093 EN C DUAL TRONIQUE Page 47/69 This document is available on www.alma-alma.fr...
Page 48: Additive Injector
For each compartment, the parameters below are set. Please note that the number of flaps that can be configured depends on the presence of a second additive injector. See the table in ANNEX 3. MU 7093 EN C DUAL TRONIQUE Page 48/69 This document is available on www.alma-alma.fr...
Page 49: Sub-Menu Option Cma - Not Applicable
7.2.5 Sub-menu HYDRAULIC – Not applicable 7.2.6 Sub-menu UNIT This menu is used to determine whether the measured quantity is a volume or a mass. UNIT QUANTITY (XX) QUANTITYL QUANTITYKG MU 7093 EN C DUAL TRONIQUE Page 49/69 This document is available on www.alma-alma.fr...
Page 50: Sub-Menu Conversion
This menu depends on the type of measuring system. Enter the coefficient of the measuring system meter. For a single linear coefficient K1=K2, the reference flows must be zero Q1=Q2=0. MU 7093 EN C DUAL TRONIQUE Page 50/69 This document is available on www.alma-alma.fr...
Page 51: Sub-Menu Viscosity Correction
: Choose the accuracy of the quantity that will be displayed and printed. FLOWRATE According to the unit set in menu (measure of a volume CONFIGURATION>UNIT>QUANTITY or a mass). MU 7093 EN C DUAL TRONIQUE Page 51/69 This document is available on www.alma-alma.fr...
Page 52: Sub-Menu Meter Flowrates
Set the minimum quantity of the EMA measuring system. This value MINIMUM QUANTITY: is given by the association of the turbine meter, the MICROCOMPT+ and other parts of the measuring system. MU 7093 EN C DUAL TRONIQUE Page 52/69 This document is available on www.alma-alma.fr...
Page 53: Sub-Menu Temperature
Conversion formula Crude products API54A Refined products API54B Ethanol at 15°C ETH15 Ethanol at 20°C ETH20 Ad-Blue AUS32 Fatty acid methyl esters FAME Ethyl tert-butyl ether ETBE MU 7093 EN C DUAL TRONIQUE Page 53/69 This document is available on www.alma-alma.fr...
Page 54: Sub-Menu Detectors
). You can configure the EMB measuring system in the same way as in the OPTIONON previous chapter for EMA. METER COEFFICIENT EMB (XX) VISCOSITY CORRECTION UNIT METER FLOWRATES QUANTITIES TEMPERATURE FORMULA DETECTORS VALVE MU 7093 EN C DUAL TRONIQUE Page 54/69 This document is available on www.alma-alma.fr...
Page 55: Menu Date And Time
The stored measurement results are completely erased if you delay or advance the time by more than 2 hours. 14.41 25.12.21 DATE AND TIME DATE (DD.MM.YY) TIME (HH:MM) MU 7093 EN C DUAL TRONIQUE Page 55/69 This document is available on www.alma-alma.fr...
Page 56: Annex 1: Presentation Of The Menu Supervisor>Icom Menus
Maintenance (*) IN PROGRESS / xx NEW UPDATE FOUND / ANY UPDATE FOUND : Synchronization of the updated files from ALMA server. If an update of SYNC FROM SERVER the functions or the communication configuration is uploaded, it will be applied on the next reboot of the MICROCOMPT+.
Page 57 : If is enabled, IP parameters can be initialized through the DHCP protocol. If DHCP is enabled, parameters are set manually  : MICROCOMPT+ IP address MU 7093 EN C DUAL TRONIQUE Page 57/69 This document is available on www.alma-alma.fr...
Page 58 Encryption protocol by a key encoded in 64 or 128 bits WEP: Encryption protocol compatible with the standard IEEE 802.1X SEC_802-1X:  Wi-Fi network password. PWD: MU 7093 EN C DUAL TRONIQUE Page 58/69 This document is available on www.alma-alma.fr...
Page 59 Access restricted to the Manager with green key and to the Maintenance with red key. The default name of the Bluetooth device includes the Microcompt+ serial number. MU 7093 EN C DUAL TRONIQUE Page 59/69 This document is available on www.alma-alma.fr...
Page 60 APN – Access restricted to the Manager with green key and to the Maintenance with red key Name of the internet access point, only if ALMA does not supply it ALMA SYSTEM – Access restricted to the Maintenance with red key. Information of connection to the ALMA FTP server for files transfer ...
Page 61 (*) NOT SYNCHRONIZED / SYNCHRONIZED DISCONNECTED/ SYNCHRONIZED CONNECTED : Status of the MICROCOMPT+ ICOM board STATE 4-digit MICROCOMPT+ radio ID Reset the pairing of the MICROCOMPT+ with the RCT5 remote control RESET: MU 7093 EN C DUAL TRONIQUE Page 61/69 This document is available on www.alma-alma.fr...
Page 62 Access restricted to the Maintenance with red key. Used to reset the angles ‘pitch’ and ‘roll’ when the truck has a horizontal position in order to correct the assembly tolerances of the MICROCOMPT+ on the truck. MU 7093 EN C DUAL TRONIQUE Page 62/69 This document is available on www.alma-alma.fr...
Page 63 SD card – Access restricted to the Manager with green key and to the I-COM SOFTWARE RESET Maintenance with red key. Reboot the I-COM board. MU 7093 EN C DUAL TRONIQUE Page 63/69 This document is available on www.alma-alma.fr...
Page 64: Annex 2: Visualization Of The Permitted Characters On The Microcompt+ Display
FORM DOC 120 A ANNEX 2: VISUALIZATION OF THE PERMITTED CHARACTERS ON THE MICROCOMPT+ DISPLAY: <SPACE> " & ‘ < > <DEL> MU 7093 EN C DUAL TRONIQUE Page 64/69 This document is available on www.alma-alma.fr...
Page 65: Annex 3: Assignments Table According To The Number Of Flaps, Product Returns And Additive Injectors
Flaps and product returns assigned to the compartments are set in METROLOGICAL mode menu . Additive injectors are set in SUPERVISOR mode CONFIGURATION>COMPARTMENT OPTIONS menu CONFIGURATION>ADDITIVE TYPE The table below present the assignment options: MU 7093 EN C DUAL TRONIQUE Page 65/69 This document is available on www.alma-alma.fr...
Page 66: Annex 4: Printings
1 /ON 2 /ON /OFF /OFF 3 /ON /OFF /OFF 4 /ON /OFF /OFF 5 /ON /OFF /OFF 6 /ON CPT PLEXMI: N, RETURN PLEXMI: N MU 7093 EN C DUAL TRONIQUE Page 66/69 This document is available on www.alma-alma.fr...
Page 67 (A) PRESET+PURGE; (P) PURGE; (T) TRANSFER;(C) LOADING; (T) TRANSFER;(C) LOADING; (V) DRAINING; (B) RELEASE; (V) DRAINING; (B) RELEASE; (G) GRAVITY; (-) UNDEFINED (G) GRAVITY; (-) UNDEFINED With active option MU 7093 EN C DUAL TRONIQUE Page 67/69 This document is available on www.alma-alma.fr...
Page 68 1000 FOD+ 2000 FOD+ 2000 3000 1500 4000 3000 In case of dispute, the measurement 5000 5000 results stored by the main indicating device providing proof. MU 7093 EN C DUAL TRONIQUE Page 68/69 This document is available on www.alma-alma.fr...
Page 69: Related Documents
Replacement of the backup batteries on the AFSEC+ electronic board FM 8501 Adjustment of a DMTRONIQUE FM 8510 Adjustment of a temperature chain in a MICROCOMPT+ MU 7093 EN C DUAL TRONIQUE Page 69/69 This document is available on www.alma-alma.fr...

Alma DUAL TRONIQUE User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Alma DUAL TRONIQUE

Summary of Contents for Alma DUAL TRONIQUE

Table of Contents