If You Have Powered Speakers With An Adapter; If You Have Powered Speakers Without An Adapter - Lenovo 3000 H200 5357 User Manual

Note: If the audio configuration interfaces in above differ from your actual
computer, you may use the above steps as reference to configure the 5.1
surround audio device in your actual audio configuration interface and read
the electronic help information for further assistance.

1.4.8 If you have powered speakers with an adapter:

(This picture is only a sketch print, it does not show the actual figure of the speaker)
a. Connect the cable that runs between the speakers if necessary. On some
speakers, this cable is permanently attached.
b. Connect the adapter cable to the speaker if necessary. On some speakers, this
cable is permanently attached.
c. Connect the speakers to the audio line-out port on the computer.
d. Connect the adapter to the power source.

1.4.9 If you have powered speakers without an adapter:

(This picture is only a sketch print, it does not show the actual figure of the speaker)
a. Connect the cable that runs between the speakers if necessary. On some
speakers, this cable is permanently attached.
10
User Guide
31035089_3000 H_UG_EN.indd 10 2008.8.27 6:04:54 PM