Notices-------------------------------------------------------------------------------------------------------------------------------------- 3 Product introduction ------------------------------------------------------------------------------------------------------------------- Packing list---------------------------------------------------------------------------------------------------------------------------- Instructions for use---------------------------------------------------------------------------------------------------------------------- Description of buttons------------------------------------------------------------------------------------------------------------- Explanation of indicators---------------------------------------------------------------------------------------------------------- Adjusting the monitor------------------------------------------------------------------------------------------------------------- Installation of base---------------------------------------------------------------------------------------------------------------------- Cable connection------------------------------------------------------------------------------------------------------------------------ OSD menu--------------------------------------------------------------------------------------------------------------------------------- Menu description------------------------------------------------------------------------------------------------------------------- Basic parameters------------------------------------------------------------------------------------------------------------------------...
Notices Before using this product, please read this User Manual carefully and keep it well Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools. Make sure the monitor is placed on a at surface. lf the monitor falls down, it may cause human injury or device damage.
Instructions for use Description of buttons Menu button: Press to enter sub-menus. Down button: Press to move down in the menu. Up button: Press to move up in the menu. Exit/hot key: Press to return to the previous menu. Power button: Press to turn on/o the monitor. Explanation of indicators Indicator light: A steady blue light indicates that the power...
Installation of base Unpack the carton, remove the foam, and lay the monitor at on the table. Keep the foam under the monitor until you install the stand. 1. Take out the base and bracket and tighten them with screws. Take out the shaft assembly and lock it with the base of the bracket with screws.
Page 7
Installation of mount 1.Open the carton package, take out the foam and put it at on the table top. 2.Remove the upper foam box, take out the lm-coated bag of the fuselage, and put the fuselage into theoriginal lower foam box again. 3.Find the PM4*16 screws from the accessory kit, and lock the screws and wall-mounted components in the threaded holes of the rear shell.
Cable connection * The bottom interface con guration at the back of the monitor varie with products. * Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.
OSD menu Menu description The color and shape of the OSD menu of the actual computer may be slightly di erent from them shown in the gure. Speci cations of the OSD menu may change with improvements of functions without prior notice. The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the monitor is powered on and the button is pressed.
Page 10
Functions of the monitor vary with models, and the functions in this manual are for reference only. None None Input Source None HDMI1 None HDMI2 Brightness 0-100 Blacklevel 0-100 Brightness/ Contrast Contrast 0-100 On/Off Gamma 1.8/2.0/2.2/2.4/2.6 Pictrue Mode Standard/Photo/Movie/Game/FPS/RTS Color Temperature Warm/Cool/User Color Setting Low Blue Light...
Need help?
Do you have a question about the V3L6W and is the answer not in the manual?
Questions and answers