Baby Mode 1; Baby Mode 2 - Leica D-Lux 3 Instructions Manual

MENU
Press [ ] to display the [SCENE MODE] menu and select a scene mode. (P62)
SET

Baby mode 1

1
2

Baby mode 2

This mode adjusts the exposure and tone
to bring out the healthy color of your baby's
skin. The flash will be weaker than normal if
you choose to use it.
You can set the birthdays of two babies by
using [BABY1] and [BABY2].
1
1 month 10days
10:00 DEC. 1.2006
• The baby's age appears when you are
showing the picture later.
n Age display setting
• To show age, first enter the birthday,
select [WITH AGE], and press [MENU/
SET].
• To not show age, select [WITHOUT AGE],
and press [MENU/SET].
BABY1
WITH AGE
WITHOUT AGE
BIRTHDAY SET.
CANCEL SELECT
Advanced
n Birthday setting
1 Select [BIRTHDAY SET.] and press
2 [PLEASE SET THE BIRTHDAY OF THE
3 Press [MENU/SET] to exit.
• If you select [WITH AGE] but you haven't
19
• The focus range is 5 cm (0.16 feet)
• The ISO sensitivity is fixed to [
• The auto bracket setting is disabled.
• The digital zoom is fixed to [OFF].
• After turning on the camera in [BABY1]/
• Actual age displays depend on the
• The display style when printing may differ
• The display on the actual day of your
SET
MENU
• Check the clock and birthday settings if
• Note that if you have selected [WITHOUT
• For resetting the birthday setting, use
[MENU/SET].
BABY] appears on the display. Select
year/month/day with w/q, then change
the date with e/r.
set the birthday, a message appears.
Press [MENU/SET] and follow steps 2
and 3 to enter the birthday.
(Wide)/30 cm (0.98 feet) (Tele) to Z.
[BABY2] in scene mode or switching to
[BABY1]/[BABY2] from other scene
modes, the age and current date and time
are displayed for about 5 seconds at the
bottom of the screen.
[LANGUAGE] setting.
slightly from the display style on the
screen.
baby's birth will be 0 month 0 day.
the age shown is incorrect.
AGE], age information will not be
recorded for any pictures you take. The
information will not appear even if you
select [WITH AGE] after taking pictures.
[RESET] in the [SETUP] menu. (P24)
ISO
].
69