Video Output; Lcd Brightness; Picture Capture; Self View - ACN IRIS 3000 User Manual

4-6-1-5. Video Output
Select the "Video Output" choosing
between "LCD", "TV Out (PAL)" and "TV
Out (NTSC)". Use Video Output if you
wish to connect your digital video
phone to a TV or computer screen.
4-6-1-9. Power Saving
Select the interval at which the
phone will switch to power saving
mode from "30 - 60 - 90 seconds"

4-6-2. Wallpaper

The wallpaper is the background displayed on your LCD screen. You can choose a different wallpaper pattern to be displayed from an SD
card or USB flash drive inserted in your digital video phone.
Select "Settings" in the Main Menu
and Press OK
You will receive a "Wallpaper should
be selected!" screen
Select "Yes" or "No"
and Press OK to save
4-6-1-6. LCD Brightness
Use Navigation buttons to adjust the
"LCD Brightness". This is used to
adjust the brightness of your screen.
Select "System Settings" in the
Settings Menu and Press OK
Select "Type" from the Display Menu
and Press OK
Note: You will receive a "No USB/SD device!" warning if you do not have a USB or SD device plugged into
your digital video phone.
IRIS 3000® DIGITAL VIDEO PHONE USER MANUAL
4-6-1-7. Picture Capture
Select the device where the pictures
are stored (either "SD" or "USB"). Use
to capture pictures while on a call.
Select "Display" in the
System Settings Menu
Select the device type – USB or SD
and Press OK
21
4-6-1-8. Self View
Select "On" if you want to enable the
self view option. Use this to allow you
to see what the caller on the other
end of the call sees on their screen.
Select "ON" to enable the Wallpaper
function
Select the image and Press OK or
the location of the images and Press
BACK to save