Table of Contents
Advertisement
H610TM-ITX
AVX2 Ratio Offset
AVX2 Ratio Offset specifies a negative offset from the CPU Ratio for AVX
workloads. AVX is a more stressful workload that lower the AVX ratio to ensure
maximum possible ratio for SSE workloads.
CPU Cache Ratio
The CPU Internal Bus Speed Ratio. The maximum should be the same as the CPU
Ratio.
Min Cache Ratio
The Min Internal Bus Speed Ratio. The maximum should be the same as the CPU
Ratio.
BCLK Aware Adaptive Voltage
BCLK Aware Adaptive Voltage enable/disable. When enabled, pcode will be aware
of the BCLK frequency when calculating the CPU V/F curves. This is ideal for
BCLK OC to avoid high voltage overrides.
Boot Performance Mode
Select the performance state that the BIOS will set before OS handoff.
Ring to Core Ratio Offset
Disable Ring to Core Ratio Offset so the ring and core can run at the same fre-
quency.
SA PLL Frequency Override
Configure SA PLL Frequency.
BCLK TSC HW Fixup
BCLK TSC HW Fixup disable during TSC copy from PMA to APIC.
FLL Overclock Mode
Nominal is good for normal core ratio overclocking. Elevated and Extremely
El¬evated are good for high BCLK OC.
UnderVolt Protection
When UnderVolt Protection is enabled, user will not be able to program under volt-
age in OS runtime. It is recommended to keep it enabled by default.
[Enabled] This option allows BIOS undervolting. Undervolt Protection in Runtime
is enabled.
[Disabled] No Undervolt Protection in Runtime.
39
Advertisement
Table of Contents
