Roller Grill WD 100 Manual

Warming display

Advertisement

Available languages

Available languages

Instruction for use and installation

WD 100 / WD 200 / WDL 100 / WDL 200

Description of the appliance

These heated displays are special designed for snacks, bars and bakeries...
They will allow you to display and keep the temperature all sorts of products, pies,
pizza, pastries, croissants...
Your display comes from a range of two models: one or two levels, and two
versions: with or without light.
Completely panoramic for a better display of the products provided with a front and
rear opening on each level for a fast and practical service. The inside dimensions are
designed to fit 1/1 GN container. You can set the humidity with the water to put in the small
drawer located in the bottom center.
These appliances are for a professional use and must therefore be operated by qualified staff.

Technical data

Product
Dimensions (mm)
WD 100
590 X 350 X 285
WD 200
590 X 350 X 390
WDL 100
590 X 350 X 375
WDL 200
590 X 350 X 480
Product
Power (W)
Supply (volt)
WD 100
650
WD 200
650
WDL 100
650
WDL 200
650
304300-400-401 en ma 2012.01
*304.300 - *304.400 - *304.401 WARMING DISPLAY - MANUAL
Dimension of the
Weight (kg)
inside area (mm)
560 x 330
8.5
560 x 330
12
560 x 330
11.5
560 x 330
15

Minimum current of the network

Ph 1
Ph 2
Ph 3
230
2,8 A
-
-
230
2,8 A
-
-
230
2,8 A
-
-
230
2,8 A
-
-

Operation

To turn the display on, push on the on/off switch.
The temperature setting of the display is done through the thermostat. To preheat it, set the
thermostat on the wanted position until the pilot light switches off.
Put delicately water inside the tray in order to regulate humidity inside the display.
The quantity inside the tray is enough for one day of use.

Installation

The electrical wiring has to be done by a qualified technician. Wire your appliance to a plug
with an earth connection. Please check whether the current doesn't exceed the maximum
capacity of the appliance (6 Amps).

Explanation of the wire colors :

Phase :
Brown
Neutral:
Blue
Earth :
Yellow-Green

Cleaning

Before starting to clean, make sure that your display is completely cool.
Your appliance must be cleaned every day with a non-abrasive sponge and some washing-up
liquid.
Clean all the outside regularly with warm water, dishwashing liquid and a soft sponge.
Rinse your appliance with a damp sponge.
Do not clean your appliance under running water as the water entering the system could
damage your appliance.
Should the appliance break down, please have it checked by a qualified technician.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WD 100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Roller Grill WD 100

  • Page 1 Instruction for use and installation Operation WD 100 / WD 200 / WDL 100 / WDL 200 To turn the display on, push on the on/off switch. The temperature setting of the display is done through the thermostat. To preheat it, set the Description of the appliance thermostat on the wanted position until the pilot light switches off.
  • Page 2 *304.300 - *304.400 - *304.401 WARMING DISPLAY - MANUAL Notice d’utilisation et d’installation Fonctionnement WD 100 / WD 200 / WDL 100 / WDL 200 Mise en marche : Appuyez sur l’interrupteur marche arrêt. Présentation de l'appareil Le réglage de la température de la vitrine se fait à l’aide du thermostat, pour le préchauffage réglez le sur la position désirée jusqu’à...
  • Page 3 Gebrauchs- und Installationsanweisung Inbetriebnahme: Auf den Ein/Aus-Schalter drücken WD 100 / WD 200 / WDL 100 / WDL 200 Die Temperatureinstellung der Vitrine erfolgt mit Hilfe des Thermostats. Stellen Sie diesen für das Vorwärmen bis zum Erlöschen der Wärmekontrollampe auf die gewünschte Position Vorstellung des Geräts...

This manual is also suitable for:

Wd 200Wdl 100Wdl 200304.300304.400304.401

Table of Contents