Advertisement
We are delighted to introduce TheGigRig G3 ATOM pedalboard switching system.
We designed G3 ATOM from the ground up, obsessively testing and retesting every aspect of its design to
ensure we delivered the most robust, fully featured, tonally transparent switching system in the world.
G3 ATOM is an expression of our passion: we compromised on nothing.
-
Daniel Steinhardt
We want you to jump right in, so here is what you need to know to get started.
BACK PANEL CONNECTIONS
TOP PANEL
CONNECTIONS
To connect your effects to the back panel of G3 ATOM:
1. Connect G3 Atom FX Loop SEND to FX Pedal Input.
2. Connect FX Pedal OUTPUT to G3 ATOM Loop Return.
3. Connect your amp(s). PLEASE NOTE, if you are only using one amplifier/DAW you MUST use OUT1 as this is
your earth/ground. Connect to your second amplifier or channel/DAW using OUT2, as this is isolated and
phase reversible.
4. Connect your tuner to the TUNER/AUX Output.
5. Connect any MIDI enabled pedals using the MIDI INPUT/OUTPUT.
QUICK START GUIDE
G3 ATOM QuickStart Guide V.1 / ©The GigRig Ltd 2020
Advertisement
