Taking Pictures Using Auto Bracket - Leica C-Lux 2 User Manual

Advanced (Recording pictures)
Taking Pictures using
Auto Bracket
In this mode, 3 pictures are automatically
recorded in the selected exposure compen-
sation range each time the shutter button is
pressed. You can select the picture with the
desired exposure from the 3 pictures with
different exposures.
1 Press  [
] several times until
[AUTO BRACKET] appears, set
the compensation range of the
exposure with /.
AUTO BRACKET
SELECT
• You can select [OFF] (0), [F1/3 EV],
[F2/3 EV] or [F1 EV].
• When you do not use auto bracket,
select [OFF] (0).
2 Press [MENU/SET] to finish.
• You can also press the shutter
button halfway to finish.
40
MENU
EXIT
• When setting auto bracket, the auto
bracket icon [ ] appears on the lower
left of the screen.
• When taking pictures using auto bracket
after setting an exposure compensation
value, the pictures taken are based on the
selected exposure compensation value.
When the exposure is compensated, the
exposure compensation value appears on
the lower left of the screen.
• The auto bracket setting is canceled if you
turn the camera off or power save mode is
activated.
• When setting auto bracket and continuous
mode simultaneously, auto bracket will be
performed.
• When auto bracket is set, the auto review
function is activated regardless of the auto
review setting. (The picture is not
enlarged.) You cannot set the auto review
function in the [SETUP] menu.
• When auto bracket is activated,
[AUDIO REC.] cannot be used.
• An exposure compensation may not be
possible with auto bracket depending on
the brightness of the subject.
• If both auto bracket and continuous
modes are set, only auto bracket will be
performed.
• Auto bracket cannot be set in
[STARRY SKY] in scene mode.