180 Degree Camera; What Is The 180 Degree Camera; How Does The 180 Degree Camera Work; Degree Camera Precautions - Ford TRANSIT 2022 Owner's Manual

WHAT IS THE 180 DEGREE
CAMERA
The 180 degree camera provides an
extended image of the area behind your
vehicle.
HOW DOES THE 180 DEGREE
CAMERA WORK
When you switch the 180 degree view on,
the view splits into three images. You can
use the right and left outer images when
reversing to check for cross traffic and
pedestrians.
When you use the 180 degree camera view,
objects behind your vehicle are shown
extremely stretched and do not appear as
actual ratio.

180 DEGREE CAMERA

PRECAUTIONS
WARNING: The rear view camera
system is a reverse aid supplement
device that still requires the driver to use
it in conjunction with the interior and
exterior mirrors for maximum coverage.
WARNING: Objects that are close
to either corner of the bumper or under
the bumper, might not be seen on the
screen due to the limited coverage of the
camera system.
WARNING: Reverse your vehicle
slowly. Failure to follow this instruction
could result in the loss of control of your
vehicle, personal injury or death.
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
180 Degree Camera
rear cargo door is ajar. If the rear cargo
door is ajar, the camera will be out of
position and the video image could be
incorrect. All guide lines disappear when
the rear cargo door is ajar. Failure to
follow this instruction could result in
personal injury.
turning camera features on or off when
the transmission is not in park (P). Make
sure your vehicle is not moving.
Note: If the image comes on while the
transmission is not in reverse (R), have the
system inspected by your authorized dealer.
Note: When towing, the camera only sees
what you are towing. This might not provide
adequate coverage and you might not see
some objects.
Note: Guide lines do not appear when you
switch the 180 degree view on.
SWITCHING THE 180 DEGREE
CAMERA ON AND OFF
When you shift to reverse (R) and the rear
view camera image appears, press the
button in the upper left corner of the touch
screen to switch the 180 degree view on.
Press the button again to switch it off.
The 180 degree view turns off when you
shift into park (P) or into any forward gear
and the vehicle speed sufficiently
increases.
Note: Whenever you shift to reverse (R) the
standard rear view camera image with
guidelines is the default view.
267
WARNING: Use caution when the
WARNING: Use caution when