PROAIM LV-4WAY-01 Assembly Manual page 5


Castle Nut has been properly attached to the
Leveler.

Loosen the ratchet knob of the offset
(Not Included) to mount it over the bazooka
and then properly tighten the ratchet knob.

Place the Leveler over the offset and then
properly tighten it using the Castle ring.

Manually tighten it with the Castle Nut
Wrench, as shown in the image.
NOTE: Perfectly suited with Mitchell/Euro risers,
tripods, bazooka, dollies, cranes, etc.
5