PROAIM LV-4WAY-01 Assembly Manual page 2

4-Way Camera Leveller with Bazooka

Loosen the ratchet knob of the 4-Way Leveler
and mount it over the bazooka

Mount the 4-way Leveler on top of the
bazooka (Not Included)
with the knob of the leveler.
NOTE: The Leveller can tilt up to the angle of 7°.
The Anti-Slip 4 Levelling Knobs assist in
micro-levelling of the camera setup. Possibility of
swivelling and Quick-Lock mechanism offers
quick, easy and secure assembly.

You can loosen an unlocking knob to rotate/
swivel the Leveller, as shown in the image.

Loosen the Castle ring of the Mitchell
mounting Fluid head
(Not Included).

Mount the Mitchell mounting Fluid head
(Not Included) on the leveler.
(Not Included).
and tighten it properly
and remove it
Setup
2