PROAIM LV-4WAY-01 Assembly Manual page 3


Remove the plate by pushing the knob of the
Mitchell mounting Fluid head

Remove the plate by pushing the knob of the
Mitchell mounting Fluid head

Attach the plate of the fluid head by matching
it with the base plate at the bottom of the
camera (Not Included)
tighten it with a screw driver.

Slide the camera (Not Included)
head and then mount it.

Manually tighten the Fluid head's knob, as
shown in the image.

Now the camera has been properly attached
to the Fluid head.
(Not Included)
(Not Included)
and then properly
on the Fluid
3