Advertisement
Quick Links
1
4-Way Camera Leveller-Mitchell to Mitchell/Euro
Mount
(LV-4WAY-01)
A s s e m b l y M a n u a l
What's In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Castle Nut
Mitchel Castle
Wrench
Allen key 5mm
ring
Proaim 4-Way Leveller
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
Advertisement
Related Manuals for PROAIM LV-4WAY-01
Summary of Contents for PROAIM LV-4WAY-01
- Page 1 Wrench Allen key 5mm ring Proaim 4-Way Leveller All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright...
- Page 2 4-Way Camera Leveller with Bazooka Setup Loosen the ratchet knob of the 4-Way Leveler and mount it over the bazooka (Not Included). Mount the 4-way Leveler on top of the bazooka (Not Included) and tighten it properly with the knob of the leveler. NOTE: The Leveller can tilt up to the angle of 7°.
- Page 3 Remove the plate by pushing the knob of the Mitchell mounting Fluid head (Not Included) Remove the plate by pushing the knob of the Mitchell mounting Fluid head (Not Included) Attach the plate of the fluid head by matching it with the base plate at the bottom of the camera (Not Included)
- Page 4 4-Way Camera Leveller with Offset Setup Loosen the knob of the Leveler and open it. Remove the Mitchell Castle ring by loosening Remove the bolts in the Castle nut using the Allen key. Then remove the bolts of the Castle nut using the Allen key.
- Page 5 Castle Nut has been properly attached to the Leveler. Loosen the ratchet knob of the offset (Not Included) to mount it over the bazooka and then properly tighten the ratchet knob. Place the Leveler over the offset and then properly tighten it using the Castle ring.
- Page 6 YOUR PROAIM 4-WAY CAMERA LEVELLER ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.