User Safety; Operation; Introduction; Initial Inspection - OPTILAB DFB-4-B User Manual

DFB-B Benchtop User's Manual

1.4. User Safety

1. The DFB-B benchtop unit emits high intensity light from the optical output
receptacle. Avoid direct exposure to skin and eyes.
2. The equipment case is fully certified for EMS protection. The user should never
open the equipment case; any attempt will void the warranty and may result in
electric shock and EMS attack to equipment in the vicinity.
3. The user should avoid using any solvent or vaporizing chemical to clean the
equipment panel or case. It may result in damage to the surface and internal
circuits.

2. Operation

2.1. Introduction

This chapter describes how to operate the DFB-4-B benchtop unit, and discusses
the location and function of the controls and connectors.

2.2. Initial Inspection

Your DFB-4-B benchtop unit was carefully inspected before it left the manufacturer.
It should be in proper working order upon receipt. You should, however, inspect the
unit for any damage that may have occurred in transit. If the shipping container or
the packing material is damaged, keep it until the contents of the shipment have
been checked to be free of mechanical and electrical damages. Notify Optilab, LLC
promptly if any notable damage is found.
Optilab, LLC
600 E. Camelback Road, Phoenix, AZ 85012
Phone: (602) 343-1496, Fax: (602) 343-1489, Email: sales@oequest.com
Page 2 of 12