Advertisement
Section 1
IMPORTANT! This appliance must be left to stand in an upright position
for at least 4 hours before being switched on for the first time.
Remove all packaging and securing tape from the appliance.
Wash the interior of the appliance with lukewarm water containing a small
amount of bicarbonate soda (5ml to 0.5 litres of water).
Position the appliance in a dry atmosphere and out of direct sunlight.
Do not position next to a cooker or other sources of heat, i.e., radiator.
If positioned next to another fridge or freezer, leave a minimum gap of
2cm between the appliances to avoid condensation.
A clearance of 50mm should be left above the appliance. If this cannot be
achieved, you should ensure a clearance of 25mm is maintained on each
side of the appliance.
Please ensure that there is a small 'air-gap' between the condenser on the
rear of the appliance and the rear wall.
Do not place or store heavy items on the top of this appliance.
Ensure that the appliance is positioned on a firm flat floor.
This appliance must be level. Adjust the level by screwing the adjustable
feet up or down (use your fingers or a suitable spanner).
Ensure that the appliance is upright and both feet are in firm contact with
the floor so that the cabinet is stable.
Connect the plug to an adjacent 13amp socket outlet and ensure that the
appliance is not standing on the supply cable.
6
Advertisement
