Advertisement
Biofiller
Operator Instructions (cont.)
6. 'To Deliver' Pipettes
As soon as the liquid in the pipette comes to a standstill, wait for the
period of time required to ensure the timed liquid has been fully dispensed.
NOTE:
Pipetting time is printed on the pipette e.g.'EX + 10s'
7. To Remove Pipette
Hold the pipette at its upper end and gently twist and remove from the
silicone pipette holder.
8. Cleaning
The Biofiller can be easily maintained and cleaned. A damp cloth is all that
is required.
9. Replacing Filter
When replacement of the filter is necessary, proceed as follows:
a. remove pipette
b. unscrew the nose cone
c. remove the filter and replace with a new one (Cat. No. 721962)
d. re-assemble
10. Leak Test
Attach a pipette and aspirate liquid to a minimum of half the capacity of
the pipette. Hold the pipette over a suitable reservoir. If liquid drips from
the pipette tip, dismantle the unit (see 9) and re-assemble correctly.
11. Returning For Repair
When returning Biofiller for repair, please ensure the instrument has been
cleaned and decontaminated.
Sartorius Biohit Liquid Handling Oy
Laippatie 1
FI-00880 Helsinki
Finland
info@biohit.com
www.biohit.com
Headquarter
Sartorius Corporate
Administration GmbH
Weender Landstrasse 94-108
37075 Goettingen, Germany
Phone +49.551.308.0
Fax +49.551.308.3289
www.sartorius.com
Copyright by Sartorius Biohit, Helsinki, Finland.
All rights reserved. No part of this publication may be
reprinted or translated in any form or by any means without
the prior written permission of Sartorius Biohit.
The status of the information, specifications and illustrations
in this manual is indicated by the date given aside.
Sartorius Biohit reserves the right to make changes to
the technology, features, specifications and design of the
equipment without notice.
All trademarks are Sartorius Biohit property unless otherwise
stated. Patents granted or pending.
Filter
Cat. No. 721962
Silicone holder
Cat. No. 721963
Nose Cone
White:
Cat. No. 721964
Advertisement
