Load The Required Software; Install Prosoft Configuration Builder (Pcb) - ProSoft ProLinx Wireless 6201-WA-MNET Setup Manual

Load the Required Software

2 Load the Required Software
In This Chapter
There is one application (ProSoft Configuration Builder) and one file (PPF) that
you must download from the ProLinx Solutions CD to your PC or Laptop whether
you are using the sample configuration or are modifying the configuration to suit
the needs of your application. This section describes how to get everything you
need loaded to your PC. You must perform these steps regardless of
whether you are configuring your modules now or just reading about the
sample applications.
2.1

Install ProSoft Configuration Builder (PCB)

ProSoft Configuration Builder helps you configure the module for your
application.
Insert the ProLinx Solutions CD into the CD-ROM drive on your PC or
1
Laptop. The ProLinx Solutions splash page appears:
Select
2
Follow the prompts to install ProSoft Configuration Builder to your hard disk.
3
ProSoft Technology, Inc.
June 27, 2007
Install ProSoft Configuration Builder (PCB)............................ 11
Copy the Sample Application File .......................................... 12
Install Configuration Tool.
6201-WA-MNET ♦ ProLinx Wireless
High Speed Wireless Modbus TCP/IP Gateway
Page 11 of 48