Installing The Turbocharger; Fig. 5: Placing The Turbocharger On The Bracket - ABB XAC19173 Operation Manual

Operation Manual / 4 Product description / A200-L
2 Removal and installation / 2.3 Installing the turbocharger
2.3

Installing the turbocharger

2.3.1 Placing the turbocharger on the bracket
Fig. 5: Placing the turbocharger on the bracket
Remove covers from the oil connections.
u
Align turbocharger and place on engine bracket.
u
Tighten fixing screws
u
slightly loosen the lifting gear.
Remove lifting gear from suspension eyes of the bearing casing.
u
Connect cable to speed sensor.
u
Connect all gas, air and oil pipes.
u
© Copyright 2018 ABB. All rights reserved.
(Steps for fastening the turbocharger
HZTL4036_EN
→11); while doing this, only
Revision L May 2018