Warning Plates On The Turbocharger; Fig. 2: Warning Plate Locations - ABB XAC19173 Operation Manual

Operation Manual / 4 Product description / A200-L
1 Introduction / 1.5 Warning plates on the turbocharger
1.5

Warning plates on the turbocharger

Warning plates are affixed at the following locations:
Fig. 2: Warning plate locations
If warning plates are not present in the designated locations or not readable, proceed as fol-
lows:
Order new warning plates from ABB Turbocharging Service Stations.
u
Remove any warning plates that have become unreadable.
u
Clean and degrease the areas designated for the warning plates.
u
Fit new warning plates and remove protective sheets.
u
Turbochargers supplied to the enginebuilder without insulation must be equipped later with
warning plates on the insulation. This is the responsibility of the enginebuilder.
© Copyright 2018 ABB. All rights reserved. HZTL4036_EN Revision L May 2018