Noctua NA-IS1-14 Sx2 Installation Manual

Chromax.black

Designed to replace the fan's stock NA-AVP1 anti-vibration

pads, the NA-IS1-14 are compatible with all current

square-frame Noctua 120x25mm fans and extremely

straightforward to install:

For case fan applications, either the supplied self-tapping

screws or the included NA-AV3 anti-vibration mounts

can be used to sandwich the spacer between the fan

and the case panel. For radiator mounting, both M3 and

UNC 6-32 screws are supplied.

Included mounting parts:

2x NA-IS1-12 inlet spacers

8x NA-AV3

8x NM-SFS4-BK

anti-vibrations mounts

long fan screws

8x NM-SFS5-BK

8x NM-SFS6-BK

radiator screws (M3)

radiator screws (UNC)

NOCTUA NA-IS1-14 Sx2 chromax.black

INSTALLATION MANUAL

Table of Contents

Do you have a question about the NA-IS1-14 Sx2 and is the answer not in the manual?

Page 1 INSTALLATION MANUAL Designed to replace the fan’s stock NA-AVP1 anti-vibration pads, the NA-IS1-14 are compatible with all current square-frame Noctua 120x25mm fans and extremely straightforward to install: For case fan applications, either the supplied self-tapping screws or the included NA-AV3 anti-vibration mounts can be used to sandwich the spacer between the fan and the case panel.
Page 2 NOCTUA NA-IS1-14 Sx2 chromax.black INSTALLATION MANUAL Caution We supply both M3 thread (small head) and UNC 6-32 thread (bigger head) screws. Please make sure to select the correct screw type for your radiator (refer to manufacturer specifications or contact manufacturer)!