Program Mode; Function Buttons; Time Zone Setting - La Crosse Technology WS-8001U Instruction Manual

PROGRAM MODE

To enter the Program Mode hold down the "SET" button for 2 seconds, until "-5EST"
flashes in the Date LCD. The Program Mode is laid out in a manner that allows you to
program each function separately, or you can follow the instructions entirely to program
the Moon Phase Clock. Complete programming is usually done for the initial set-up, and
will require you to skip step 1 of programming sections III through VIII. Press the
"SNOOZE" button at any time to exit the Program Mode, or wait approximately 15
seconds for the Moon Phase Clock to automatically return to normal operation.
I)

FUNCTION BUTTONS

There are 4 function buttons located on the backside of the Moon Phase Clock. The
function buttons are labeled: SET, +, ALARM, and SNOOZE.
II) TIME ZONE SETTING
1) Hold down the "SET" button for 2 seconds, the default setting "-5EST" will
flash in the Date LCD.
2) Press the "+" button to select the appropriate time zone. There are 13 time
zones to choose from:
-5EST
-6CST
-7MST
-8PST
-9ALA
-10HAW
-11
-12
GMT
-1
-2
-3
-4ATL
3) Press the "SET" button to confirm the time zone setting, and to advance to
DST (Daylight saving time) setting.
Eastern Time (default setting)
Central Time
Mountain Time
Pacific Time
Alaskan Time
Hawaiian Time
Greenwich Mean Time
Atlantic Time
5