Program Mode; Function Buttons; Time Zone Setting - La Crosse Technology WS-8055U Instruction Manual

PROGRAM MODE

To enter the Program Mode hold down the "SET"
button for 2 seconds, until "-5EST" flashes in the
Date LCD. The Program Mode is laid out in a
manner that allows you to program each function
separately, or you can follow the instructions
entirely to program the Moon Phase Clock.
Complete programming is usually done for the
initial set-up, and will require you to skip step 1 of
programming sections III through VIII. Press the
"SNOOZE" button at any time to exit the Program Mode, or wait approximately 15
seconds for the Moon Phase Alarm to automatically return to normal operation.
I)

FUNCTION BUTTONS

There are 3 function buttons located on the front of the Moon Phase Alarm and one
on top (snooze). The function buttons are labeled: SET, +, ALARM, and SNOOZE.
II) TIME ZONE SETTING
1) Hold down the "SET" button for 2 seconds, the default setting "-5EST" will
flash in the Date LCD.
2) Press the "+" button to select the appropriate time zone. There are 13 time
zones to choose from:
-5EST
-6CST
-7MST
-8PST
-9ALA
-10HAW
-11
-12
GMT
-1
-2
-3
-4ATL
3) Press the "SET" button to confirm the time zone setting, and to advance to
DST (Daylight saving time) setting.
Eastern Time (default setting)
Central Time
Mountain Time
Pacific Time
Alaskan Time
Hawaiian Time
Greenwich Mean Time
Atlantic Time
5